Home » Tech Industry News » Designing electrical design panels for factories and warehouses

Designing electrical design panels for factories and warehouses

Electrical design panels are undeniably an integral part of a building structure. Albeit, the necessities of a quality panel are generally very simple; low cost, easy to follow, good appearance and reliable.

An ideal design panel should be budget friendly, with low production and maintenance costs. All these factors should be kept in consideration during the design process. One also needs to be very flexible at this stage; because everything might not work as per the initial plan, hence customisation along the way is essential. Now, that we’ve discussed the basics, let’s get down to business. Here’s everything you need to know about designing electrical design panels for factories and warehouses.

  1. Don’t cut short the design process

An ideal control panel design includes physical and electrical requirements. Hence, just producing the schematic drawings is not enough. One needs to create physical layout designs to go with them. An experienced control panel designer tries to produce an accurate physical layout and schematic designs because it simplifies the process and minimises problems.

  1. Wire sizes and different components should be coordinated

Ideally, while designing electrical design panels for factories and warehouses, a panel designer generally size wires based on load current and the circuit is based on the wire size. The right wire size then ensures that the circuit can deliver to the required load current and the circuit protection doesn’t over heat. Also, attention should be paid while selecting the right component type based on function and voltage because the former ensures the right functioning and the latter ensures that the voltage and load current is handled reliably.

  1. Best control type should be used.

When designing mimic panels, the designer should always start with any easy control components. They switch-over to the more complicated ones only if, the simple wouldn’t get the job done perfectly. Programmes like programmable Smart Relay or Programmable Logic Controller (PLC) are more functional. They provide significantly more functionality, but require a computer and programming software as well.

  1. Best operator device should be used

While designing electrical design panels for factories and warehouses, one should start with simple operator devices like Pilot lights, Pushbuttons, Digital Panel Meters etc. Colour Graphic door laminate might be added to jazz things up a bit. If that doesn’t does the trick, the designer might opt for a Human Machine Interface.

  1. By category, the best in class products should be used

A concept based on product awareness, panel designers tend to have the knowledge of the array of products available in the market. This allows them to compare and use products that provide the best balance of price, form and function. The trick really though, is to not overcomplicate the panel. Whatever its intended use is, it will need to be designed to give information to people in a nice and simple way. If you’re looking for a supplier of these panels, choose a team who are equipped with the knowledge to design and create them from scratch and be sure to check out their portfolio.